What rear end is in a 1967 Mustang?
1967 Ford Mustang Axle Information & Ratios
| Axle code | Ratio & type |
|---|---|
| F | 2.80 locking differential |
| 2 | 2.83 open differential |
| B | 2.83 locking differential |
| 1 | 3.00 open differential |
What size rear end does a 67 Mustang have?
They usually came from the factory with an 8", or in some cases 9" depending on engine, options, etc. I believe the 8.8 came on later model Mustang. via
How much is a 1967 Mustang worth today?
The Cost of One Today
However, this level of affordability is not present in today's market as these Mustangs remain highly sought after. ClassicCars.com has several standard Fastbacks listed for sale, in good working condition, starting from about $69K. via
What is so special about 1967 Mustang?
In all, the 1967 Ford Mustang was considered by most an improvement over previous model years. It was more powerful, it featured an improved suspension system, and it had an aggressive appearance. via
How do I know if my Mustang has 3.73 gears?
Especially with late model Mustangs, it can be difficult to figure out what gears your Mustang has since Ford has offered everything from 3.31s to 3.73s from the factory 2011 and up. Typically, the stock ratio is on the build sheet, or could be on a sticker on the door panel or glove compartment. via
How much horsepower does a 1967 289 have?
Engine Basics
| Year | 1967 “A” Code | 1967 “K” Code |
|---|---|---|
| Power (hp) | 225 hp @ 4400 RPM | 271 hp @ 6000 RPM |
| Torque (lb/ft) | 305 lb/ft @ 3200 RPM | 312 lb/ft @ 3400 RPM |
| Compression | 10.0:1 | 10.5:1 (65) |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
Are 1967 Mustangs rare?
RARE COLLECTIBLE 1967 MUSTANGS
1967 was the last year for the 289 Hi-Po engine option. Only 472 cars were equipped with this engine, making it an extremely rare find! via
How many 1967 Mustangs are left?
A total of 472,121 Mustangs were sold in 1967. Once again, the Hardtop coupe was the biggest seller with over 75% of the cars sold. The fastback sold 71,042 units (15% of sales) and the convertible sold 44,808 units (9.49% of sales).
...
Total Production Numbers.
| Body Style | Total |
|---|---|
| Total | 472,121 |
Is 67 Mustang fast?
The top speed of the '67 Mustang fastback was 115mph. via
Is the 67 Mustang unibody?
Hanging above the Ford stand here at SEMA is an entire 1967 Mustang fastback unibody. Well, to be fair, it LOOKS like a '67 'Stang, but it's actually a brand-new body shell from Dynacorn Classic Bodies, Inc. Sitting underneath this is a complete "1967" fastback, built with 95 percent reproduction parts. via
What makes a 67 Mustang a GT?
The GT option was offered in 1967 consisted of power front disc brakes, grill mounted fog lights, dual exhaust with quad outlets (except the 200 HP 289), GT gas cap, F70x14 tires, rocker paint stripes and GT or GTA (if an automatic) side emblems. The Mustang GTA was a Mustang GT with automatic transmission. via
Are 3.73 or 4.10 gears better?
4.10s are going to accelerate faster and decelerate faster on lift. However the trade off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms the 4.10s will feel quicker and 3.73 will feel faster. via
What are 3.73 gears good for?
A numerically higher axle ratio provides a mechanical advantage to send more of the engine's available torque to the rear tires (and front tires, in a four-wheel drive vehicle), but you pay the price at the fuel pump. So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21. via
Are 4.10 gears worth it?
Installing 4.10 gears improves the car's performance on the track but with negligible effects to the highway driving. If your car is equipped with an overdrive, you may not even notice a difference in gas mileage with the new higher gearing. via
How much HP can a 289 block handle?
The standard 4v 289 was factory rated at 225 hp and the hipo was 271 with torque at 300/310 . via
How much HP can I get out of a 289?
If you rev an engine high enough it will make the HP (assuming it's designed to do so), but it's far from a good street engine. IMHO, 300-350hp is pretty much the upper limit for a streetable 289. via
How fast is a 1967 Mustang 289?
4) in 1967, the model with 2-door fastback coupe body and V-8 4727 cm3 / 288.5 cui, 149 kW / 203 PS / 200 hp (SAE gross) offered since September 1966 for North America U.S.. According to the ProfessCars™ estimation this Ford would accelerate 0-60 mph in 8 sec, 0-100 km/h in 8.5 sec and quarter mile time is 16.4 sec. via
Why is the Ford 9 inch so good?
The Ford 9-inch is desirable because it has a removable carrier, which allows quick rear end changes. Many racers carry an extra carrier assembly with a different rear end ratio so they can try different combinations on the same day while at the track. via
What years did Ford make the 9 inch rear end?
The Ford 9-inch rear end, so named because of its 9-inch ring gear diameter, was manufactured from 1957 to 1987 by the Ford Motor Company and installed in some intermediate and most full-size Ford, Lincoln, and Mercury passenger cars, F-Series ½-ton trucks, and Econoline vans. via
What Fords have 9 inch rear ends?
Common applications
What year Mustang is best to restore?
To get the best restoration project ROI, the first-generation Mustangs prior to 1970 (1965-1968 being the best years) offer the most payback. These models are rare, long gone from junkyards, and hard to find in the average newspaper (or Craig's List) classified section. via
How are Mustangs so loud?
Ford set the exhaust system up with two valves on the outlets of one of the pipes. The position of those valves vary continually based on engine load and pedal response. The Mustang's dedicated exhaust tuner then goes through and ensures the algorithm is accurate to give a true Mustang sound. via
What is the most desirable Mustang?
Ranking The 10 Best Ford Mustangs of All Time
What is the rarest model of Mustang?
The GT350R was limited to only 34-units, making it one of the rarest Mustangs ever built. Heck, probably one of the rarest muscle cars, in general. A couple of models have made it to auction sites in the past few years, all selling for well over $1 million per. via
What year is the most valuable Mustang?
A 1965 Ford Shelby GT350 Competition, Shelby American's first Mustang built racing, was just sold at Mecum's auction in Kissimmee, Florida. The final price paid, after adding the buyer's commission, was $4,070,000, reinforcing this as the world's most valuable Mustang. via
Why is the 67 Mustang called Eleanor?
For over 20 years we have been involved in the buying, restoration, rebuilding and upgrading of 60's Mustangs. Ever since the movie “Gone in 60 Seconds” we have been very active in the Pepper grey GT500 “Eleanor “so named after the remake in 2000 starring Nicholas Cage. via
What Motors came in a 67 Mustang?
1967–1968
| Mustang 1967–1968 | |
|---|---|
| Powertrain | |
| Engine | 200 cu in (3.3 L) Thriftpower I6 289 cu in (4.7 L) small block V8 302 cu in (4.9 L) small block V8 390 cu in (6.4 L) FE V8 427 cu in (7.0 L) FE HiPo V8 428 cu in (7.0 L) Cobra Jet V8 |
| Transmission | 3-speed manual 4-speed manual 3-speed automatic |
| Dimensions |
What engines came in a 67 Mustang?
Engine Specs
| Engine Name & Year | Power (hp @ RPM) |
|---|---|
| 1967 – 390 FE V8 (6.4 L) | 320 hp @ 4800 RPM |
| 1967 – 289 Windsor V8 (4.7 L) | 271 hp @ 6000 RPM |
| 1967 – 289 Windsor V8 (4.7 L) | 306 hp @ 6000 RPM |
| 1967 – 289 Windsor V8 (4.7 L) | 225 hp @ 4800 RPM |
How fast is a 289 V8?
The actual zero to 60 mile per hour acceleration time for the 1967 Ford Mustang 289 was 7.3 seconds, which was one of the fastest cars on the road sold to consumers at that time, according to the Auto Channel. It went from zero to 30 miles per hour in 2.6 seconds and zero to 100 miles per hour in 18.9 seconds. via
What kind of Mustang is in John Wick?
The Ford Mustang that John Wick drives in the film is sometimes known as the Hitman Mustang. Despite being called a Boss 429 in the movie, the five Mustangs used in the film are actually 1969 Mach 1 Ford Mustangs. via
What Mustang came with a 390 engine?
Ford put the S-Code 390 in a good many Mustangs: 28,800 in 1967; 9,228 in '68; and 10,464 in '69. Yet their low profile in the market has resulted in values that are steady, less subject to whims of fad and fashion. The 390 was based on the FE-series V-8s introduced in 1958 for Thunderbirds and Edsels. via
How much horsepower does a 67 Mustang have?
The bare bones of the '67 Mustang are plenty strong enough to take over 400 horsepower, so a measly 320 hp aren't going to bend a thing. The 390 is strong, no doubt about it. In a heavy, full-sized Ford it isn't much to sound off about, but in a 3400-lb. compact, it comes on like spit on a griddle. via
Do Mustangs have frames?
The Mustang's Uni-body Construction
Mustangs use what is called a uni-body design. This means the frame and body are a single combined unit. via
Does a 67 Mustang have power steering?
1967: As Mustang matured, new features were added. A tilt-away wheel with seven adjustments allowed drivers to choose the steering position that fit their preference. It also made it easier to get in. A new, faster ratio (20.3:1) power steering system became available in 1967, making turn-in quicker. via
What is a GTA Mustang?
The Mustang GTA got to see the daylight in 1967, and it's actually a Grand Touring model with an automatic transmission. So while GTA means something entirely different today, the moniker has a different purpose on the '67 Mustang, and it certainly doesn't stand for Grand Theft Auto. via
Are 67 and 68 Mustangs the same?
The fairly major redesign in 1967 meant that there were few major changes for the 1968 Mustang. Though the two are similar, new safety features, paint colors, and aesthetic revisions were added for the new model. via
What size rims are on a 1967 Mustang?
Ford Mustang 1967 4.7
| Tire | Rim | |
|---|---|---|
| 205/70R14 92S | 6Jx14 ET12 | 1.9 |
| 205/65R15 91T | 6.5Jx15 ET15 | 2.1 |
| 225/60R15 91T | 7Jx15 ET10 | 2.1 |
| 225/55R16 91V | 7.5Jx16 ET0 | 2.1 |
What gear ratio is the fastest?
In the real world, typical street machines with aspirations for good dragstrip performance generally run quickest with 4.10:1 gears. via
How many teeth does 373 gears have?
| Manufacturer | Motive Gear |
|---|---|
| Brand | Motive Gear |
| Model | Motive Gear D30-373 Rack and Pinion, 41-11 Teeth, 3.73 Ratio |
| Item Weight | 2.2 pounds |
| Product Dimensions | 15.5 x 11 x 5.25 inches |
What is the best first gear ratio?
For most street performance applications, a 10:1 final First gear ratio is usually considered optimal. The disadvantage of operating a 4.10:1 axle ratio on the street with a 1:1 high gear is excessive freeway engine speed. via