Can you run 35s with 3.73 gears?

You will be fine. Just gonna lose mpg and slow your truck down. I have run 35s with 3.73s and no issues at all. In fact, my recent Plat had a 4-inch lift, heavy 34.5 inch Nitto Trails, and 3.55 gears, and ran great! via

Is 3.55 or 3.73 better?

PERFORMANCE: The larger the axle ratio number, the quicker the truck will accelerate. For example, a truck equipped with 3.55:1 axle gearing will accelerate faster than one equipped with a 3.31 axle ratio. Similarly, a pickup with a 3.73 axle ratio will be faster than one with 3.55s. via

What gears are best for racing?

If we have a daily driver, 2.55 to 3.25 gear ratios typically work best, whereas a street/strip application we would usually use a 3.42 to a 3.90 gear ratio, and race applications most commonly use a 4.10 and above gear ratios. via

What is the best highway gear ratio?

Rear end gears (2.79's, 3.00's, 3.25's, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91's, 4.11's etc.
Are 3.73 gears good for highway?

3.73 Ratio 4.10 Ratio
Higher Top Speed Lower Top Speed


What is the fastest gear ratio?

In the real world, typical street machines with aspirations for good dragstrip performance generally run quickest with 4.10:1 gears. via

How do you determine top speed? (video)

How many teeth do 3.55 gears have?

39-11 Teeth

Manufacturer ‎Motive Gear
Brand ‎Motive Gear
Model ‎Motive Gear D35-355 Rack and Pinion, 39-11 Teeth, 3.55 Ratio
Item Weight ‎11.44 pounds
Product Dimensions ‎15.5 x 11 x 5.25 inches


How many teeth does a 410 ring gear have?

Motive Gear D70-410 Rack and Pinion, 41-10 Teeth, 4.1 Ratio. via

Can you run 37s on a Jeep Gladiator? (video)

Do bigger wheels affect transmission?

Your transmission will shift according to the speed your going. Different tire sizes, big or small, will affect how the transmission shifts. For example, small tires will rotate two times as a big tire rotates one time, so the ratio is 2 to 1. If you have bigger tires you will travel further than smaller tires. via

What is a 411 rear end?

"411" refers to the ratio betwen the rear end gears, and is more correctly stated as "4.11 : 1" (Did Chevy have 4.11 : 1 axles, or is it 4:10 : 1?) meaning that the driveshaft will turn 4.11 times for every time the rear wheels turn once. via

What is a 4.11 rear end?

A 4.11 refers to a 4.11:1 ratio. This means that the driveshaft turns 4.11 times for each time the axles turn once. This yields strong acceleration but, depending on transmission ratios, can mean the car cruises at high RPMs. via

What rear gear ratio is Nascar?

Rear gear ratios will be adjusted to maintain a maximum engine speed of 9,000 RPM and a 1.38 third gear ratio will be used at all tracks smaller than 1.25 miles. The digital dashboard, which was optional for teams during the second half of this season, will be mandatory in all vehicles. via

Which gear is best for going up a hill?

Uphill: Approach uphill situations with an appropriate amount of momentum, a higher gear (3rd in an automatic transmission) and less throttle to reduce torque, which also reduces wheel spin. via

What gear ratio is best for fuel economy?

Best MPG ratio

If getting the best fuel economy is priority, then choose the lowest numerical number offered, such as 3.08, 3.23 or 3.31. This applies to highway driving; city driving mpg isn't really affected by the axle ratio. If you do a mix of both, go with the “standard” axle ratio offered by the manufacturer. via

What is a 3.55 rear axle?

The numbers 3.55 and 3.73 refer to Ford truck axle ratios. The axle ratio tells you the number of revolutions the drive shaft makes compared to the rear axle. For a 3.55 axle ratio, the drive shaft will turn 3.55 times for every one revolution of the tire. via

What is an axle ratio on a Jeep?

When looking for a professional to help re-gear your Jeep, make sure they replace both the front and rear axles of your Jeep with premium quality gears. Typical new gear ratios are 4.10:1, 4.56:1, 4.88:1, or 5.13:1. via

What is a good gear ratio for off roading?

Under 50 Crawl Ratio - Most factory setups fall here. 50-60s Crawl Ratio – Backroads and light trail use. 80s Crawl Ratio – Intermediate trail use. 110-130s Crawl Ratio – Ideal for crawling, it allows taking obstacles at a slow, controlled speed without riding the brakes or applying constant throttle to avoid stalling. via

Leave a Reply

Your email address will not be published.