How much horsepower does a 6.0 Chevy make?

The Chevy 6.0 engine is a 364.4 cubic inch 6.0L with a bore and stroke of 4 x 3.625. It's a V8 that comes in cast iron or aluminum depending on make and model and has been rated at around 341 horsepower. via

How do you rebuild a LQ4? (video)

How many miles will a 6.0 Vortec last?

Overall, the 6.0 vortec is an extremely dependable and reliable motor. These engines frequently last beyond 300,000 miles with minimal issues beyond regular maintenance. However, making it to 300,000 miles will likely require some non-engine repairs and maintenance, such as suspension components. via

How much horsepower can you get out of a LQ4?

The LQ4 and LQ9 have very strong blocks. They can handle over 1,000 hp. using nitrous, a blower, or a turbo. However, you will need to upgrade the internals to handle that kind of power. via

How much horsepower does a LQ4 6.0 have?

300-330 hp

Performance Specifications
Compression Ratio 9.4:1
Horsepower Rating 300-330 hp
Torque Rating 360-370 ft./lbs.


What cubic inch is a 6.0 GM?

364 ci

Type: 6.0L Gen IV V8 Small Block
Displacement: 5967cc (364 ci)
Engine orientation: Longitudinal
Compression ratio: 9.7:1
Valve configuration: Overhead valves


How far can you bore a 6.0 LS?

The 6.0L block—used in the LQ4, LQ9, and LY6—is the most popular with hot rodders. It features a 4.000-inch bore and can be purchased brand new for $800. It can safely accommodate a 4.030-inch bore and is good for 421 ci when matched with a 4.125-inch stroke. via

How do I identify a 6.0 LS engine? (video)

What is the best LS Motor to build?

According to SMP, its cast-aluminum (357-T6) LS block is the strongest available with extensive improvements. A priority-main oiling system ensures there are no contaminations while lubricating the intake pipe and the engine. via

What LS engine is aluminum?

The LS2 and L76 are noteworthy in that they are both Gen IV 6.0L aluminum block engines, and that they came from the factory in both cars and trucks. via

What does LQ9 mean?

The LQ9 is a 6.0L Gen. 3 small block engine used in GM trucks between 2002 and 2007. For marketing purposes, it was also known as the Vortec HO 6000 or VortecMAX. via

Is the LQ4 a short block?

LQ4 Short Block - 480 HP For $3,775. via

What's the difference between LQ4 and LS2?

The LQ4 has dished pistons and runs lower CR. Also the rods are not as good in the LQ4 either. Also the LS2 has 243 heads with higher CR. The LQ4 comes with 317 heads and a truck intake. via

What gas mileage does a 6.0 Vortec get?

Chevy 6.0L Vortec Engine Overview

However, mechanics report the engines tended to have low gas mileage of about 10 to 12 miles per gallon. via

What transmission goes with 6.0 Vortec?


Fourth Generation Vortec and LS Motors
4.00 in. Bore Blocks 6.0L LS2 L76 L98 L77 LY6 LFA LZ1


What truck can tow 18000 pounds?

Ford F-350 Super Duty

And with 440 horsepower and 950 pound-feet of torque on tap, the Super Duty truck can tow a cool 18,000 pounds. via

How much can a 2500HD truck pull?

The Chevrolet Silverado 2500HD has a maximum towing capacity of 36,000 pounds with the proper equipment. To tow this much, the Silverado 2500HD requires Regular Cab/Long Bed/2WD with the available Duramax 6.6L Turbo-Diesel V8. via

Does GM still make the 6.0 engine?

GM will continue to produce the 332-hp, 367-pounds-feet LFA version of the 6.0-liter V-8 for use in the gas-electric Two-Mode Hybrid Silverado and Sierra light-duty pickups. The standard 6.0-liter will also continue to be available in GM's heavy-duty pickups as the only gasoline engine. via

Leave a Reply

Your email address will not be published.