What is the strongest stick weld?

TIG welding produces the strongest type of weld. via

What type of welding Do you use a stinger for?

Stick welding is still the preferred welding process for many welders. The simplicity of the welding machines is probably the biggest reason for that. via

What is the stinger on a stick welder?

If you're already into stick welding, you probably have a preference towards a certain type of “stinger”. These are electrode holders that grip the stick electrode firmly while the welding process is being performed (while transferring the necessary amperage to the rod). via

What is the best electrode for stick welding?

E7018 electrodes contain a thick flux with high powder content and are one of the easiest electrodes to use. These electrodes produce a smooth, quiet arc with minimal spatter and medium arc penetration. Many welders use E7018 electrodes to weld thick metals such as structural steel. via

What is the difference between 6013 and 7018?

Higher numbers mean the rod has more coating. A 7018 rod will have more coating, while a 6013 rod will have less. via

When would you use a 6013 welding rod?

APPLICATIONS: 6013 electrode is commonly used for automobile bodies, truck frames and bodies, ornamental iron, metal furniture, farm implementations, machinery guards, storage tanks, or wherever appearance is important or desirable. via

Is the Stinger positive or negative?

Stick electrodes are generally run with a positive polarity (DCEP). With this setup, your electrode holder (stinger) has a positive current flowing to the stick electrode (also just called a “rod”). Your ground lead will be attached to the negative terminal of your machine. via

How do you hold a stinger?

Instead of grabbing the stinger and just letting the lead hang, give the welding lead one wrap around your forearm then grab the stinger. This way your shoulder is carrying all the load instead of your arm. This allows you to carry the weight easier and also allows your arm and hand to easly manipulate the rod. via

How much do underwater welders make?

Salary Ranges for Underwater Welders

The salaries of Underwater Welders in the US range from $10,237 to $203,999 , with a median salary of $37,028 . The middle 57% of Underwater Welders makes between $37,028 and $92,466, with the top 86% making $203,999. via

How do I choose an electrode holder? (video)


What does SMAW stand for?


Acronym Definition
SMAW Shielded Metal Arc Welding
SMAW Shoulder-Launched Multipurpose Assault Weapon
SMAW Stick Metal Arc Welding
SMAW Second Marine Aircraft Wing (US Marine Corps)


How do you ground a stick welder? (video)


When to use 6010 or 7018?

E 6010 electrode can be used on painted, galvanized, and unclean surfaces, while E 7018 is used on clean or new sheet metal. E6010 is used for deep penetration welding, while E 7018 is used for welding metal that tends to crack, producing quality welds with excellent toughness and high ductility. via

Can you drag a 6010 Rod?

Step or drag.. either method will work fine. It just depends on the conditions as you are welding. Most of the pipe I weld is thin wall (sch 40 or under) with nickel land, and I've never dragged completely on 6010 root going uphill around a pipe. via

What is the difference between 6011 and 6013?

The 6013 electrode is best used for light to medium penetration on a thin metal, or sheet metal. The 6011 electrode offers more penetration than the 6013 so you can weld a slightly thicker material. via

What is the easiest rod to weld with?

The easiest welding rod to use is a 1/8″ (3.2mm) E6013 rod. The fact that most welding schools start teaching with E6013 rods is proof enough. An E6013 has an easy arc strike and is the most forgiving to manipulation errors during welding. Let's see the matter in more detail. via

What is 6018 welding rod used for?

Feeder. Pipe Alignment / Welding Clamps. Tube / Circumferential Welder. Turning Roll / Rotator. via

What is a 7014 welding rod used for?

E7014 is a high speed iron powder type electrode that can be used on AC or DC welding current. This electrode has smooth arc characteristics, good arc stability, low spatter and produces medium to low penetration. E7014 offers outstanding slag removal and bead appearance. via

How many amps does a 6013?

6013 Tensile strength is 60,000 PSI Amperage 40-80 Amps AC, DCEN, DCEP (Either Polarity). via

Can I weld aluminum with 6013?

However, it should never be used to weld any of the 2XXX alloys or other alloys containing copper, such as 6013 or 6111 because the weld will very likely crack. Both 4043 and 5356 work well when welding 6XXX alloys. via

What is the difference between 6011 and 7018 welding rods?

Metal Web News claims that 6011 welding rods are capable of producing welds that feature a 60,000 psi minimal tensile strength. The 7018 welding rods produce stronger welds that feature minimal tensile strengths of 70,000 psi. via

Is AC or DC better for stick welding?

DC stick welding offers advantages over AC when welding steel, including smoother and more stable arcs, easier starts, fewer arc outages, less spatter and easier vertical up and overhead welding. DC positive polarity provides a high level of penetration into the steel. via

What current does 7018 run on?

In general, the 7018 rod is used with currents up to 225 amps. A rule of thumb is to use 30 amps of current per 1/32 inch of rod diameter. That would mean using 90 amps of current on a rod that is 3/32-inch in diameter. via

Is 7018 reverse polarity?

What Polarity Is Used For 7018? The 7018 electrodes are for all position welding. It means they are ideal for both AC and DC polarity applications. via

Can you touch the rod while stick welding?

NOTE: As long as you are grounding yourself properly while stick welding (which includes wearing proper clothing) you should be fine to touch the electrode with no problems . via

What is a welding whip?

Whips refer to a smaller diameter welding lead being attached to your regular sized welding lead. Often placed on the last 10 feet and then attached to your stinger, these whips come in handy for longer days on the job. They reduce weight and in turn will lessen fatigue on the arms. via

How many hands should you hold the welder with?

Using two hands to keep the gun steady is possible when you are doing MIG welding. Although you can do MIG welding one handed if you want, it is best to use both hands to keep a constant space between the work and the tip. via

What is the highest paid welding job?

Rig welders are about the highest-paid welders in the world. They work long and difficult hours and they have the most advanced educations and qualifications. via

What is the most high paying job?


Rank Occupation 2021 Median Wages
Employment column one Hourly
1 Anesthesiologists $100.00+
2 Cardiologists $100.00+
3 Dermatologists $100.00+


What is the correct arc length?

Length of arc: The correct arc length varies with each electrode and application. As a good starting point, arc length should not exceed the diameter of the metal portion (core) of the electrode. For example, an 1/8-inch 6010 electrode is held about 1/8 inch off the base material. via

How do you choose electrode size?

Generally the size of the electrode that should be used depends on the thickness of the part to be welded. For thin metals the electrode is only slightly larger than the metal to be welded. For example if a plate is of 2.0 mm thick the electrode of 2.5 mm should be used. via

What is the difference between E6010 and E6011?

In E6010, the arc stabilizer is sodium, and in E6011 it is potassium (both in the first column, check them out!). That's pretty much the biggest difference in the formulation between these electrodes, but the consequences are huge. via

What are the 3 types of welding?

Three of the most common are Arc, MIG (Metal, Inert Gas) or GMAW (Gas, Metal Arc Welding), and TIG (Tungsten Inert Gas) welding. In order to know which process is best for the particular job you're working on, here's what you should know about each of them. Arc welding is the oldest of these three welding processes. via

What does TIG stand for?

Tungsten Inert Gas (TIG) welding, also known as Gas Tungsten Arc Welding (GTAW) is an arc welding process that produces the weld with a non-consumable tungsten electrode. via

What causes the black soot when you weld aluminum?

Weld soot is caused by the interaction of aluminum and magnesium oxide. Since magnesium and aluminum boil at a lower temperature than the temperature of the welding arc, some of the aluminum and magnesium evaporate in the weld filler metal during the welding. via

What happens if you weld without a ground?

if you don't have your work grounded, there is no place for the electricity(the arc) to go. there will not be an arc; no weld. if you don't use a ground and you yourself are not insulated, you become the ground and the arc will go through you. via

How do you prevent electric shock when welding?

Ground the work or metal to be welded to a good electrical ground. Always insulate yourself from the work and ground. Wear proper protective equipment, such as rubber boots and rubber pads, if performing arc welding in wet or high humidity conditions. Wear rubber gloves under the welding gloves. via

Should you ground a welding table?

Yes, welding tables should be grounded to prevent voltage leakage from the output leads. Whenever working with high voltage electricity, grounds prevent electricity from arcing and finding a human target. Welders are unlikely to be electrocuted without a ground, but they can receive a nasty shock. via

Why is 6010 so hard?

These rods do not contain potassium in their flux covering as E6011. Potassium helps to stabilize the arc. Furthermore, for most welding requiring E6010 rods, you use whip and pause techniques that add extra stress to the welder. As a result, E6010 rods create an arc that is very hard to stabilize. via

Why is 6010 used for root pass?

I have found, and think most welders will agree, that 6010 runs more smoothly. The slag chips off better than 6011, and this is one reason it is used more often than 6011 in root passes on pipes. Another advantage of these electrodes is the speed at which they burn. via

What is 7024 rod used for?

Sureweld 7024 is ideal for making high speed horizontal fillet and lap welds on mild and some alloy steels, such as earthmoving and construction equipment, truck bodies, ships, barges and railcars. via

Do you push or pull a 6011?

6011 is push rod,you push the puddle,with 6013 you drag the puddle. via

Can you whip 7018?

If you are using E6010 or E6011, whipping the electrode is a common technique. However, if you are using E7018, as suggested by "aevald", it isn't usually "whipped" with favorable results. via

Do you push or drag 6011?

Re: 6010 rod - drag or push? Neither. 6010/6011 are whipped & paused, or you can do small circles. via

Leave a Reply

Your email address will not be published.