How much torque can a Dana 80 handle?

It has an 11,000-pound gross axle weight rating and a continuous manufacturer's output torque rating of 2,500 lb-ft. via

How much weight can a Dana 80 handle?

According to several sources, a Dana 80 can have a Gross Axle Weight Rating (GAWR) of up to 11,000 pounds. A Dana 70 can have a weight rating of up to 10,000 pounds, but 8,000 pounds is much more common. A 14-bolt can have up to an 8,600-pound GAWR. via

How do I identify a Dana 80?

All 1994-2002 Dana 80 Rear Axles in Dodge Ram trucks have a Bill of Material Number (BOM) stamped on a Build Tag attached to the differential by two of the differential cover bolts (yellow arrows). The BOM number is a 6 digit number beginning with a 6 plus a dash number (ex: 605523-3). via

How heavy is a Dana 80?

The Dana 80 has a GAWR up to 11,000 pounds (5,000 kg), however it is common practice among manufacturers to derate Dana 80's. via

How wide is a Dana 80?

The base price is a brand new Dana 80 Axle Housing with 4" x 1/2" (. 500) Wall Tubing. We have standard widths for total wheel mount to wheel mount width. 65", 67", 69" (STD GM 1 Ton Width) and 72" widths. via

What did Dana 70 come in?

The first Dana 70 front axle was used in 1958 by Dodge in the W300, in both 4.88 and 5.87 ratios. International started using Dana 70 front axles in the late 1960s. Both companies used Dana 70 front axles until the mid-1970s (Dodge W300 pickup up until 1978, discontinued in 1979). via

What is a 14 bolt rear end?

In case you're not familiar with the 14-bolt, the axle gets its name from the 14 bolts that secure the differential cover. First appearing in 1973, the 14-bolt is one of the most used rear axles in the General Motors stable. via

Are all 14 bolt carriers the same?

14 Bolts Have a Carrier Break

For manufacturing and performance reasons, manufacturers often change the carrier at a midpoint in a gear ratio range to deal with the smaller and smaller pinion and the thicker ring gear. This means that there are two different carriers that come in a 14 bolt axle. via

What size ring gear does a Dana 60 have?

The Dana 60, however, has a massive 9.75-inch ring gear no matter what truck it came out of. via

How much torque can a Dana 60 handle?

Both versions have a torque output rating of 5,500 lb-ft. The Dana 60's ring gear is 9.75 inches in diameter, and the available gear spread ranges from 3.31:1 to 7.17:1. via

Does GM use Dana axles?

GM has not used Dana axles on its full-line pickups for several decades, though it has used them on specialty vehicles and some heavier-duty trucks. The current Colorado and Canyon do not have Dana axles. via

Is Dana 70 limited slip?

The Dana 70 started out using 10 spline pinions and 23 spline axle shafts. The later, more current, Dana 70 axles use 29 spline pinions and 32 or 35 spline axle shafts. Dana offered two different limited slip differentials with the Dana 70, the "Power-Lok" and the "Trac-Lok." via

How do you tell if you have a full floating axle? (video)

https://www.youtube.com/watch?v=DPHIEmdxDFc

How do I know what size differential I have? (video)

https://www.youtube.com/watch?v=tm2wMav0L0M

What axles came in a cj7?

From 1976 to 1980, the CJ-7 used a Dana 20 transfer case, Dana 30 front axle (27- or 31-spline), and an 29-spline AMC 20 rear axle, while in recent years, Laredo package added tachometer, chrome bumpers, tow/recovery hooks and interior, comfortable leather seats, and clock. via

How much weight can a Dana 60 handle?

Inside The Strongest Dana 60 Ever Built

Keep in mind the original Dana 60 was designed for a 1-ton pickup with a 4,500-pound front gross axle weight rating (GAWR), 29 1/2-inch-tall tires, 4.10 axle gears, and engines that made less than 170 hp. via

Does Ford use Dana axles?

Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4x4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts. via

What is a full floating axle?

For a full-floating system, the axle shaft only serves to transmit the rotational torque from the differential out to the wheel. It does not carry the weight of the vehicle as a semi-floater does. On a full floater, a spindle is attached to the outer end of the axle housing. via

How can you tell if a 14-bolt is a full floater? (video)

https://www.youtube.com/watch?v=y3sXMW1CMVs

What trucks have a 14-bolt rear end?

The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks

In F-350 dual rear-wheel trucks, Ford steps up to the 11 1/4-inch ring gear Dana 80 for more weight capacity. Dodge, on the other hand, used the Dana 70 ('89 to '93) and Dana 80 ('94 to '02) axles. via

Leave a Reply

Your email address will not be published.