What year did the Ford Explorer get rear disc brakes?

All 1991-1994 Explorers had front disc rear drum. Rear disc were not even an otion on these years. All 1995 to current 4 doors have 4 wheel disc. For some reason I was thinking they were still an option on Sports. via

What year did Ford put disc brakes on cars?

Ford began packaging front disc brake options on American-built models in 1965 with the Ford Falcon, Thunderbird, Mustang, and Lincoln Continental models. Full-size Fords and Mercury models began offering disc brakes in 1966. via

What year Explorer has 8.8 disc brakes?

First appearing in 1977, the 8.8 is found in almost all Ford V8 cars from '86 on, and in V6 Rangers and Explorers. via

When did Ford start using hydraulic brakes?

Coerced by competition and public pressure, Ford introduced hydraulic brakes for the first time in 1939. via

What Ford vehicles have the 8.8 rear end?

8.8 IRS (Independent Rear Suspension)

The 8.8 IRS first saw use in the 1989 model year Ford Thunderbird and later Ford adapted independent suspension to its 3rd generation Explorer and 2nd generation Expedition SUVs. The Mustang first used the 8.8 IRS on 1999-2004 Cobra models. via

Why do we need differential?

The differential is designed to drive a pair of wheels while allowing them to rotate at different speeds. This function provides proportional RPMs between the left and right wheels. If the inside tire rotates 15 RPM less in a turn than going straight, then, the outside tire will rotate 15 RPM more than going straight. via

What is a full floating rear end?

In a full-floating axle, the axle is not attached to the axlehousing at all; it is allowed to "float" inside the axlehousing. A tubular shaft is mounted to the end of the housing and acts like your front spindle, only it is hollow to allow the axle to meet up with the wheel assembly. via

What was the first American car to have hydraulic brakes?

In 921 the hydraulic brake system was a definite improvement and the avant-garde Duesenberg Model A was the first production car to use four-wheel hydraulic brakes. In late 1923 Walter Chrysler made four-wheel hydraulic brakes that were based on the Lockheed principle but completely redesigned. via

When did cars get hydraulic brakes?

Hydraulic brakes

The hydraulic brake system was first fitted into all four wheels of a Model A Duesenberg car in 1921. via

Did Model A have hydraulic brakes?

The model A's stop as well as the cars with the hydraulics. What is really nice about the mechanicals is that the cars with them can sit for years and their brakes still work well. The hydraulics freeze up, develope leaks, and they also drie up. via

Can I replace drum brakes with disc brakes?

If you're wondering if you should convert your drum brakes over to disc brakes, the answer is a resounding yes. A drum to disc conversion is one of the best “bang for the buck” upgrades you can make to your vehicle. via

Are drilled brake discs better?

More Grip with Drilled Discs

Unlike standard brake discs drilled discs offer more grip, allowing you to brake harder and faster. This is due to the holes which have been drilled through the discs. The addition of the holes in the disc increases the friction coefficient between the brake pads and the brake disc. via

Are vented discs better?

You have a couple of options when it comes to brake rotors. Solid rotors that have a slightly larger surface and offer better durability and stopping power. Vented brake rotors that provide better cooling and are less likely to warp and fade, particularly when heat cycles spike up and down during a competition. via

How long does it take to change brake pads and discs?

How Long Does it Take to Change Brake Pads and Discs? A full brake pad and disc replacement takes between 1 and 3 hours, no matter if you need the front or rear brakes changed. Changing brake pads on their own takes between 30 minutes and 1 hour. via

Leave a Reply

Your email address will not be published.