Can a 383 stroker make 500 hp?

That combo would probably make around 465 hp and nearly 500 lb-ft, but at less rpm. But never mind that.
...
Hot Rod's Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.

True 383 Power
RPM LB-FT HP
4,500 500 428
4,600 501 438
4,700 502 449

via

Can a 383 stroker make 600hp?

It can't be done. You just can't make a lot of power with cheap cast-iron heads. Certainly you can't make 600 hp out of a 383 with them. And for sure you can't do it without a bunch of compression. via

Which engine is better a 350 or 383 stroker?

The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque. And torque is what we're after, especially in a truck. via

How much power can a 383 stroker handle?

The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque. via

How do you make a small block Chevy 383? (video)

https://www.youtube.com/watch?v=A3ZAGyvpd9w

What is a stroker motor?

As its name implies, a stroker is where we increase engine displacement by increasing piston stroke. When we increase stroke, we take the piston deeper in the cylinder bore, which increases displacement. The longer the stroke, the greater the fuel/air charge. via

How do you turn my 350 into a 383 stroker?

A simple look at the recipe shows that you can just blend marshmallows with graham crackers and put them together in the 383. The block size was set to 1,730-plus 350. A ratio of 3 to 4 from a 400 small-block rather than a 700-inch stroke like a 350. There are 43 liquified inches at 480 inches in stroke. via

What block Do I need to build a 383 stroker?

And at a glance, building the 383 seems almost as simple as mashing a toasted marshmallow and a piece of chocolate between a couple of graham crackers. A 0.030-over 350 block, plus the 3.750-inch stroke from a 400 small-block (versus the 350's 3.480-inch stroke) equals 383 cubic inches. via

How do you tell the difference between a 383 and a 350?

350 Vs.

  • Stroke Length. While the Chevy 383 stroker motor has a stroke with a length of 3.75 inches, the 350 has that of 3.48 inches.
  • Bore. The 383 stroker engine has a bore of 4.03 inches, whereas the Chevy 350 has that of 4.00 inches.
  • Engine Displacement.
  • via

    How much HP does a Chevy 350 have?

    The Chevy 350 engine is a 350 cubic inch (5.7-liter) small block V8 with a 4.00 and 3.48 inch bore and stroke. Depending on the year, make and model of a car, horsepower ranges from approximately 145 to more than 370. via

    How can I get more horsepower out of my SBC? (video)

    https://www.youtube.com/watch?v=k78x5c0HnGc

    Is a 383 A small block?

    While the standard 383 is the most common form of stroker small-block, there are several variations to this theme. via

    How much horsepower does a 383 Magnum have?

    From 1968-1970, the 383 Magnum was rated at 335 hp, although Mopar fans who remember these free-revving engines would compare seat-of-the-pants pull to the 440. Sporting the same heads and cam as the 440, but with a smaller displacement, the 383 certainly could be wound tighter. via

    How many liters is a Chevy 383?

    They are 8 l (liters) displacements. Compared to previous B-engines, which had an output of 353 lb. via

    What car has a 383 Stroker?

    This engine was used for the very first Chevy Nova and Chevy Camaro in 1903, as well as for almost all classic Chevy cars. Invented by Inventor Claude Moffet in 1980, the Chevrolet 383 Stroker is one of the newest models in Chevrolet's lineup.
    ...
    How Much Horsepower Does A 383 Chevy Motor Have?

    True 383 Power
    6,200 425 502

    via

    What is the bore and stroke of a Chevy 383?

    The 383 stroker engine has a bore of 4.03 inches and a stroke of 3.75 inches versus the GM 350's bore of 4.00 inches and 3.48 inches of stroke. via

    How do you build a stroker motor? (video)

    https://www.youtube.com/watch?v=WboUPCwflVI

    What size is a Chevy 350 bored 30 over?

    030″ over, and a . 030″ bored 350 is actually 355 cubic inches. via

    Leave a Reply

    Your email address will not be published.