How do you reset the oil light on a 2008 Acura TL Type S? (video)

https://www.youtube.com/watch?v=wfPuh1agxsc

How do you reset the oil light on a 2007 Acura TSX? (video)

https://www.youtube.com/watch?v=9pZDV1hNjuc

How do you reset the oil life on a 2009 Acura TL? (video)

https://www.youtube.com/watch?v=b3KhwnFpZPc

How do you reset the oil life on a 2007 Acura RDX?

  • Turn the ignition to RUN.
  • Press the SEL/RESET button on the instrument cluster repeatedly until engine oil life is displayed.
  • Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds.
  • Select RESET by pressing the INFO (up/down) button.

    • via

    How do you reset the check engine light on a 2008 Acura TL?

  • TURN OFF IGNITION.
  • HOLD SELECT AND RESET BUTTON FOR 10SECONDS.
  • TURN ON TO IGNITION II AND KEEP HOLD OF SELECT AND RESET BUTTONS TILL CHECK ENGINE LIGHT TURNS OFF.
  • WHEN LIGHT TURNS OFF, TURN ON THE CAR AND SEE IF ITS OFF.

    • via

    What kind of oil goes in a 2007 Acura TL?

    Mobil 1 - Advanced Full Synthetic 5W-20 Motor Oil, 5 Quart (Part No. 14991) via

    What kind of oil does a 2007 Acura take?

    SYNTEC Synthetic Motor Oil 5W-20 5 Quart. via

    How do you reset the maintenance required light on a 2006 Acura RSX?

  • Turn the ignition switch to the OFF (0) position.
  • Press and hold the Select/Reset button(s) in the instrument panel, then turn the ignition switch to ON (II) position.
  • Hold the button(s) for 10 seconds or until the indicator resets.

    • via

    How do you reset the oil life on a 2009 Acura TSX? (video)

    https://www.youtube.com/watch?v=nLaEWge5V7s

    How do you reset the oil life on a 2012 Acura? (video)

    https://www.youtube.com/watch?v=913jC6vGsR8

    How do I reset my 2008 Acura RDX? (video)

    https://www.youtube.com/watch?v=273OZUzQI4A

    How do I get rid of check emissions?

    The easiest method to reset the check engine light is to drive your car as you normally would and let the light turn off naturally by itself. If it hasn't turned off after three days, turn the car on and off three times consecutively. via

    What does service due soon A1 mean Acura TL?

    When an Acura A1 service code appears on your dashboard, you're due for an oil change and a tire rotation. via

    How do you clear B1 service on Acura?

  • Turn the Ignition On (II).
  • Press the SELECT/RESET button to navigate SERVICE B1.
  • While SERVICE B1/OIL LIFE is displayed.
  • Use the UP button to select RESET, then press again the SELECT/RESET button to RESET the OIL LIFE to 100%.

    • via

    What does service due soon B1 mean Acura?

    The B in this Maintenance Minder code represents a mechanical inspection and oil and filter change. The “1” in B-1 represents that it's time for the vehicle's tires to be rotated. B-1 service also targets the brake system for inspection and repairs as needed. via

    By autoLeave a Comment on How To Reset 2007 Acura Tl Oil Life

    Leave a Reply

    Your email address will not be published.