What tire pressure should a Subaru Ascent be at?
As a rule of thumb, tire pressure should usually be between 32-36 PSI. via
How do I change my Subaru ascent to psi? (video)
How do you check Subaru tire pressure? (video)
How do you reset the low tire pressure light on a Subaru ascent?
Drive the car at 50 mph for about 10 minutes.
Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes so it can reset the sensor. via
Does Subaru ascent have TPMS?
Tire Pressure Monitoring Sensor
If your TPMS sensor has failed or its battery has died, the tire pressure monitoring system warning light will come on. To have your 2021 Subaru Ascent expertly repaired, count on the experts at your Subaru service department to perform necessary repairs. via
How do you reset the tire pressure light on a 2019 ascent? (video)
What's the lowest tire pressure I can drive on?
The absolute lowest tire pressure you can drive on is 20 psi—and even that isn't recommended. Anything below 20 psi is considered a flat tire, and driving on it can damage your car. If your tires are this low, you should add air. Recommended tire pressures usually range between 32 psi and 35 psi. via
Why is tire pressure low in cold weather?
Tire pressure can decrease about 1 PSI (pounds per square inch) for every 10 degrees the temperature drops. It's not due to air escaping, but rather the air inside the tire condenses, taking up less space when it's cold. This is temporary because driving will heat up the tire and increase the tire's pressure. via